BACOENG 1/2″ 12VDC VITON Solenoid Valve 1/4″,3/8″,1/2″,3/4″,1″ 12VDC and 110VAC Available

#ad
Baco Engineering #ad - Bacoeng viton normally closed electric solenoid valve;1/2"ports, 1/2" 12vdc, water, two-way inlet and outlet ports with one-quarter inch 1/2" female threaded NPT connections, or fuelThis electric solenoid valve is constructed with a high-quality brass body, Viton seals, for air, BRASS body, and heat and oil resistant Viton seals.

The coil uses alternating current and energizes at 110 volts AC; voltage range + or - 10%. Quality assurance and/or conformity managed in accordance with standards:iso 9001:2000; GB/T 19001:2000; European EN61000-6-1:2001 and EN61000-6-3:2001. 1/2" 12vdc solenoid valve Both power lines can be connected with positive and negative poles.

BACOENG 1/2" 12VDC VITON Solenoid Valve 1/4",3/8",1/2",3/4",1" 12VDC and 110VAC Available #ad - Model: uss2-00066. Suitable for use with hot or cold water, e. G. Kerosene, air, gasoline, gas, very low viscosity fluids < 20 cst, oils and hydrocarbons, or diesel fuel. Ideal for for: do-it-yourself projects, moderate temperature applications, water exchange for aquarium, air horn, or bleeding moisture from an air tank.

18 watt power rating. Direct lift valve operates from 0 PSI to a maximum pressure of 145 PSI 0 MPa to 1. 0 mpa.

#ad



Anderson Metals 57001 Brass Hose Fitting, Adapter, 3/8" Barb x 3/8" NPT Male Pipe

#ad
Anderson Metals 57001-0606A #ad - And its territories. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, firefighting, road construction, mining, aircraft controls, and tire installation in industries including agriculture, and aviation. Anderson metals manufactures brass fittings, valves, and pipe nipples.

Hose barb on one end and male NPT threads on the other. The company, is headquartered in Kansas City, founded in 1951, MO. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads.

Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U. S. A. Adapter for connecting a hose to a male threaded connection of a different diameter.

Anderson Metals 57001 Brass Hose Fitting, Adapter, 3/8" Barb x 3/8" NPT Male Pipe #ad - Hose fittings have various types of connections, barbed, including threaded, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. They are made of brass, pressure, and other materials that resist corrosion, galvanized steel, stainless steel, and wear.

#ad



Southern Truck 11025 Fits 1999-2019 Ford, 1999-2012 Dodge, 2011-2019 Chevy/GMC Diesel Auxiliary Tank Install Kit, 1½" Fill Line

#ad
Southern Truck 11025 #ad - Aluminum Tee 1. 38 inch inner Diameter, 1. 50 inch Outer Diameter. Valve shut off to Avoid Overflow of Gas from Fuel Tank. All hoses and Hardware Included. Controls fuel Level from the OE Tank. And its territories. Provides consistent Gravity Feed of Fuel. Southern trucks diesel auxiliary install Kit is designed to connect your auxiliary diesel fuel tank to your truck's fuel filler neck in order to provide consistent gravity feed of fuel.

Southern Truck 11025 Fits 1999-2019 Ford, 1999-2012 Dodge, 2011-2019 Chevy/GMC Diesel Auxiliary Tank Install Kit, 1½" Fill Line #ad - The kit controls the fuel level going into your OEM tank to prevent overfill. Adapter for connecting a hose to a male threaded connection of a different diameter. Hose barb on one end and male NPT threads on the other. Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads.

Kit contents: hose, clamps and fittings and is intended for diesel fuel only. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U. S. A. Designed to work with 3/8-Inch Female Pipe Thread Drain Fitting. Easy installation.

#ad



DEE ZEE DZ97961 Auxiliary Transfer Tank Connector Kit

#ad
Dee Zee DZ 97961 #ad - All hoses and mounting hardware included. Some cutting may be required of the OEM fuel hose. Some cutting required On The OEM Fuel Hose. Connect to your dee zee auxiliary Tank sold separately to your vehicle's fuel line to always keep your tank full. Designed to work with 3/8-Inch Female Pipe Thread Drain Fitting.

All hoses and Hardware Included. Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads. Feed diesel directly Into Your Fuel Line from Your Truck Bed. Hose barb on one end and male NPT threads on the other. Listed for diesel fuel operation only. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.

DEE ZEE DZ97961 Auxiliary Transfer Tank Connector Kit #ad - S. A. All hoses and Hardware Included. Valve shut off to Avoid Overflow of Gas from Fuel Tank. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. And its territories. Provides consistent Gravity Feed of Fuel.

#ad



EDGE INDUSTRIAL 3/8" Hose ID to 1/2" Male NPT MNPT Straight Brass Fitting Fuel/AIR / Water/Oil / Gas/WOG

#ad
EDGE INDUSTRIAL #ad - Feed diesel directly Into Your Fuel Line from Your Truck Bed. Hose barb on one end and male NPT threads on the other. Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads. 40° to 160° temperature rating. Please note: npt thread size is NOT determined by its outside thread diameter in inches.

EDGE INDUSTRIAL 3/8" Hose ID to 1/2" Male NPT MNPT Straight Brass Fitting Fuel/AIR / Water/Oil / Gas/WOG #ad - Valve shut off to Avoid Overflow of Gas from Fuel Tank. Backed by edGE Industrial full manufacturers warranty. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U. S. A. Not deemed lead free. 3/8" hose id x 1/2" male npT Brass Barb Fitting. Designed to work with a 3/8" Female Piep Thread Drain Fitting.

For use with tanks Meeting Federal DOT Requirements. 150 psi maximum working pressure, -40° to 160° Temperature Rating. All hoses and Hardware Included. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. All hoses and Hardware Included.

#ad



Lund 73750 Black 50-Gallon Full-Mid Size Vertical Liquid Storage Tank

#ad
Lund 73750 #ad - This product measures 60-inches L x 18-inches W x 12-inches H. Designed to work with 3/8-Inch Female Pipe Thread Drain Fitting. Made with 14-gauge steel, this item features a black finish. 50-gallon rectangular liquid storage tank made of 14-gauge steel with a black finish. Designed to accommodate any size of LUND's cross bed boxes, this tank comes with base mounting tabs and baffles to provide an even flow of liquid.

All hoses and Hardware Included. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U. S. A. And its territories. Provides consistent Gravity Feed of Fuel. For use with tanks Meeting Federal DOT Requirements. All hoses and Hardware Included. Feed diesel directly Into Your Fuel Line from Your Truck Bed.

Lund 73750 Black 50-Gallon Full-Mid Size Vertical Liquid Storage Tank #ad - Designed to work with a 3/8" Female Piep Thread Drain Fitting. Hose barb on one end and male NPT threads on the other. 3/8" hose id x 1/2" male npT Brass Barb Fitting.

#ad



BACOENG 1/2" NPT AC110V Brass Normally Closed Electric Solenoid Valve Air Water Oil

#ad
BACO ENGINEERING #ad - These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U. S. A. Not deemed lead free. All hoses and Hardware Included. Recommended for construction and agricultural use and designed to accommodate LUND's full-size cross bed boxes. Some cutting required On The OEM Fuel Hose.

Not intended for transferring gasoline or other flammables and should be not be used as an auxiliary fuel tank. Comes with a limited lifetime warranty that protects against defects in materials and workmanship. Plunger tip:nbr adapter for connecting a hose to a male threaded connection of a different diameter.

BACOENG 1/2" NPT AC110V Brass Normally Closed Electric Solenoid Valve Air Water Oil #ad - Valve type:direct Acting, Wet Armature. Backed by edGE Industrial full manufacturers warranty. 3/8" hose id x 1/2" male npT Brass Barb Fitting. 1/2" ac110v solenoid valve 2w-025-15 voltage: ac110v body material: brass suitable media:air water oil valve Type:Direct Acting, Wet Armature Operation Mode:Normally Closed Inlet/Outlet Ports:1/2" Female NPT Threads 18 threads per inch / US Standard.

For use with tanks Meeting Federal DOT Requirements. Measures 60-inches l x 18-inches W x 12-inches H. Designed to work with a 3/8" Female Piep Thread Drain Fitting. Suitable Media:Air Water Oil.

#ad



RDS MFG INC 011408 Diesel Installation Kit

#ad
RDS MFG INC 011408 #ad - Not deemed lead free. For diesel fuel only. All hoses and Hardware Included. Automatically controls the fuel level going into your OEM tank. Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads. 150 psi maximum working pressure, -40° to 160° Temperature Rating. Designed to connect your rdS auxiliary or RDS transfer diesel fuel tank to your truck’s fuel fill hose.

Valve shut off to Avoid Overflow of Gas from Fuel Tank. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Not intended for transferring gasoline or other flammables and should be not be used as an auxiliary fuel tank. Measures 60-inches l x 18-inches W x 12-inches H.

RDS MFG INC 011408 Diesel Installation Kit #ad - 50-gallon rectangular liquid storage tank made of 14-gauge steel with a black finish. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U. S. A. And its territories. Provides consistent Gravity Feed of Fuel. For use with tanks Meeting Federal DOT Requirements.

#ad



1/4", 1/2", 3/4", 1" NPT Available 12V DC 1/4" NPT - HFS 110v Ac or 12v Dc Electric Solenoid Valve Water Air Gas, Fuels N/c

#ad
HFS SLV-12-01 #ad - For diesel fuel only. Valve type:direct Acting, Wet Armature. Suitable for gravity feed. Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads. Not deemed lead free. Backed by edGE Industrial full manufacturers warranty. Measures 60-inches l x 18-inches W x 12-inches H.

For use with tanks Meeting Federal DOT Requirements. This valve is NOT explosion proof. Durable brass construction and a quality copper solenoid are made to last. 1/2" ac110v solenoid valve Both power lines can be connected with positive and negative poles. This unit fits a 1/4" NPT thread. 150 psi maximum working pressure, -40° to 160° Temperature Rating.

1/4", 1/2", 3/4", 1" NPT Available 12V DC 1/4" NPT - HFS 110v Ac or 12v Dc Electric Solenoid Valve Water Air Gas, Fuels N/c #ad - Body material: Brass. Hose barb on one end and male NPT threads on the other. Kit includes hoses, clamps and fittings for easy installation. Specifications: 110v ac working pressure: 0-100PSI 7Bar Normally Closed Opens when powered Semi-Direct lift valve. Inlet/outlet ports:1/2" female NPT Threads 18 threads per inch / US Standard.

This 110v ac brass electric solenoid valve easily replaces broken valves for use with water, air, and other low viscosity fluids.

#ad



RDS MFG INC 71083 45 Gallon Rectangular Auxiliary/Transfer Fuel Tank

#ad
RDS MFG INC 71083 #ad - Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads. 1/2" ac110v solenoid valve Both power lines can be connected with positive and negative poles. Most rds transfer tanks also provide auxiliary fueling. Gasoline auxiliary fueling is allowed, if siphoned from the top of the tank by using an electric fuel pump.

And its territories. Provides consistent Gravity Feed of Fuel. All hoses and Hardware Included. Not deemed lead free. Not intended for transferring gasoline or other flammables and should be not be used as an auxiliary fuel tank. Recommended for construction and agricultural use and designed to accommodate LUND's full-size cross bed boxes.

RDS MFG INC 71083 45 Gallon Rectangular Auxiliary/Transfer Fuel Tank #ad - Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U. S. A. For diesel fuel only. Designed to work with a 3/8" Female Piep Thread Drain Fitting. Some cutting required On The OEM Fuel Hose.

#ad



WEIJ 2 Pcs Gold Tone 100W 5 Ohm 5% Aluminum Housed Wire Wound Resistor

#ad
WEIJ Ltd 100W5Ohm #ad - Some cutting required On The OEM Fuel Hose. Measures 60-inches l x 18-inches W x 12-inches H. Rds offers a full assortment of tanks in various capacities and dimensions to fit your needs. Comes with a limited lifetime warranty that protects against defects in materials and workmanship. 50-gallon rectangular liquid storage tank made of 14-gauge steel with a black finish.

Net weight : 60g;package Content : 2 x Aluminum Resistor. Not for potable water. Aluminum housing for heat dissipation, suitable for cooling plate installation, can be used in atrocious environment. Designed to work with a 3/8" Female Piep Thread Drain Fitting. Please note, 1/2" npt measures 0840" outside thread diameter in linear inches.

WEIJ 2 Pcs Gold Tone 100W 5 Ohm 5% Aluminum Housed Wire Wound Resistor #ad - Inlet/outlet ports:1/2" female NPT Threads 18 threads per inch / US Standard. For connecting your RDS fuel tank to your truck's fuel fill hose. Valve shut off to Avoid Overflow of Gas from Fuel Tank. High insulating capacity, good performance in vibration. This valve is n/c normally closed, meaning it is closed when power isn't supplied.

The unit operates on 12v dc power and can withstand temperatures of 23F to 176F.

#ad