for Up to 5 Gallons – Armor Coarse Non Slip Additive for Slip Resistant Acrylic Sealers, Epoxy Coatings, and Urethane Coatings

#ad
Foundation Armor #ad - 16 oz container will be enough for up to 5 gallons. Can be added to solvent based acrylic sealers, water or solvent based epoxies and urethanes. Will help to add more surface traction for a slip resistant surface. Won't affect color of finish, won't yellow. Coarse non-slip additive for solvent based acrylic sealers, and water or solvent based epoxy or urethane coatings.

for Up to 5 Gallons - Armor Coarse Non Slip Additive for Slip Resistant Acrylic Sealers, Epoxy Coatings, and Urethane Coatings #ad - Add 3 oz/gallon to the top coat for a slip resistant surface for concrete driveways, garage floors, warehouse floors, walkways, paver patios, and more. Don't forget to check out foundation armor concrete sealers and coatings, which go great with the Armor non-slip additive! We offer an extensive line of penetrating concrete sealers, wet look and high gloss sealers, and epoxy and urethane coatings.

#ad



5 GAL Armor AR350 Solvent Based Acrylic Wet Look Concrete Sealer and Paver Sealer

#ad
Foundation Armor #ad - Coverage can vary depending on the porosity of substrate and the application method. The armor ar350 is a breathable, and provide a long lasting, non-yellowing solvent based acrylic that will darken concrete and pavers to make them look wet, durable low gloss finish. The armor ar350 is manufactured in the US and made from non-recycled resins.

The armor ar350 is self-priming and can be applied to unsealed concrete and paver surfaces, as well as surfaces previously sealed with a solvent based acrylic sealer. The armor ar350 will help to reduce damage and deterioration caused by surface abrasion such as dustring, cracking, spalling, and pitting.

The armor ar350 can last up to 1-3 years on exterior surfaces and up to 3-7 years on interior surfaces before the need for a recoat. Do not apply to red clay brick, slate, tile, flagstone, or other natural stone surfaces. It can be applied to unsealed surfaces as well as surfaces previously sealed with a solvent based acrylic.

5 GAL Armor AR350 Solvent Based Acrylic Wet Look Concrete Sealer and Paver Sealer #ad - For those surfaces consider the Armor WL550 or Armor SX5000 Wait 24 hours and repeat with a second coat. How to apply: first, make sure that the surface is clean and free of any contaminants that could prevent proper penetration or adhesion. For a high gloss finish, consider the Armor AR500 Coverage: one gallon of the Armor AR350 will cover up to 200 square feet per coat.

#ad



5 GAL Armor AR500 High Gloss Solvent Based Acrylic Concrete Sealer and Paver Sealer

#ad
Foundation Armor AR5005GAL #ad - The armor ar500 is a high gloss, pure acrylic lacquer made from high quality U. S. It will enhance dull or faded surfaces, and leave behind a long-lasting, UV resistant high gloss finish. Coverage varies depending on porosity and applicator. The armor ar350 is a breathable, and provide a long lasting, non-yellowing solvent based acrylic that will darken concrete and pavers to make them look wet, durable low gloss finish.

The armor ar350 is manufactured in the US and made from non-recycled resins. The armor ar350 is self-priming and can be applied to unsealed concrete and paver surfaces, as well as surfaces previously sealed with a solvent based acrylic sealer. The armor ar350 will help to reduce damage and deterioration caused by surface abrasion such as dustring, spalling, cracking, and pitting.

5 GAL Armor AR500 High Gloss Solvent Based Acrylic Concrete Sealer and Paver Sealer #ad - The armor ar350 can last up to 1-3 years on exterior surfaces and up to 3-7 years on interior surfaces before the need for a recoat. Penetrating high solids, breathable solvent based acrylic coating with unmatched bonding characteristics. Durable, long lasting. For those surfaces consider the Armor WL550 or Armor SX5000

Manufactured resins. For best results, apply 2 coats, 24 hours apart.

#ad



5 Gal. Armor AX25 Clear Wet Look High Gloss Solvent-Based Siloxane Infused Acrylic Concrete, Aggregate, and Paver Water Repellent Sealer by Foundation Armor

#ad
Foundation Armor #ad - Do not apply on red clay brick, slate, flagstone, or other natural stone surfaces. The armor ax25 will help to darken the surface of concrete, aggregate, and pavers to bring out any dull or faded coloring. With the armor ax25 you get two products in one - a Siloxane water repellent sealer and a high gloss acrylic.

The high gloss finish left behind is resistant to UV rays, fresh and salt water, hot tire pickup, surface growth, surface abrasion, and efflorescence. The armor ax25 can be applied to unsealed surfaces, as well as surfaces previously sealed with a solvent based acrylic. Coverage rate will vary depending on surface porosity.

5 Gal. Armor AX25 Clear Wet Look High Gloss Solvent-Based Siloxane Infused Acrylic Concrete, Aggregate, and Paver Water Repellent Sealer by Foundation Armor #ad - Can be used to cure new concrete. For best results, apply 2 coats 24 hours apart. Non-yellowing, UV resistant. Protects and enhances concrete, aggregate and paver surfaces. 5 gallons will cover up to 500 FT2 in two coats. The armor ax25 is a unique Siloxane infused high gloss acrylic that offers superior water repellency characteristics.

Benefits: * breathable * can be applied with a roller or sprayer * non-yellowing and uv resistant * will reduce concrete dusting and deterioration caused by surface abrasion * Offers resistance to water, stains, easy recoat and low maintenance * When properly applied can last up to 2-5 years * Can be applied to unsealed surfaces, chemicals, and salt damage * Offers superior adhesion to a variety of concrete and paver surfaces * Will bring out the color in dull or faded concrete and pavers * Offers a durable high gloss finish * Self-priming, or surfaces previously sealed with a solvent based acrylic * Can be applied to new or existing concrete surfaces, approved as a cure and seal.

Apply in the late afternoon or early evening when air and surface temperatures are declining.

#ad



Armor Fine Non Slip Additive for Slip Resistant Acrylic Sealers, Epoxy Coatings, and Urethane Coatings - for Up to 5 Gallons

#ad
Foundation Armor ABCD #ad - Add 3 oz/gallon to the top coat for a slip resistant surface for concrete driveways, paver patios, warehouse floors, walkways, garage floors, and more. The armor ar350 is a breathable, non-yellowing solvent based acrylic that will darken concrete and pavers to make them look wet, and provide a long lasting, durable low gloss finish.

The armor ar350 is manufactured in the US and made from non-recycled resins. The armor ar350 is self-priming and can be applied to unsealed concrete and paver surfaces, as well as surfaces previously sealed with a solvent based acrylic sealer. The armor ar350 will help to reduce damage and deterioration caused by surface abrasion such as dustring, spalling, cracking, and pitting.

Armor Fine Non Slip Additive for Slip Resistant Acrylic Sealers, Epoxy Coatings, and Urethane Coatings - for Up to 5 Gallons #ad - The armor ar350 can last up to 1-3 years on exterior surfaces and up to 3-7 years on interior surfaces before the need for a recoat. Penetrating high solids, breathable solvent based acrylic coating with unmatched bonding characteristics. Durable, long lasting. Don't forget to check out foundation armor concrete sealers and coatings, wet look and high gloss sealers, which go great with the Armor non-slip additive! We offer an extensive line of penetrating concrete sealers, and epoxy and urethane coatings.

Will bring out color in dull and faded surfaces. Can be used on poured concrete, concrete pavers, aggregate, stamped concrete, and more. Can be used on unsealed surfaces, or on surfaces previously sealed with a solvent based acrylic.

#ad