Top 10 Pi 4 with PoE – Single Board Computers

As an Amazon Associate I earn from qualifying purchases.

1. waveshare

#ad

2021 New Version Official Raspberry Pi POE+ HAT for Raspberry Pi 4/3B+, Supports 802.3at PoE Standard with 5V DC/4A High Power Output,with Controllable Brushless Cooling Fan

#ad
waveshare #ad - Compared to its predecessor raspberry pi poe hat, implementing the 802. 3af/at standard with 5v dc/4a larger power output, it features better cooling effect, providing enough power for both Raspberry Pi 3B+/4B at max load and other peripherals at the same time.

The raspberry pi poe+ hat is a power over Ethernet PoE+ accessory for the Raspberry Pi 3B+/4B. Fully isolated switched-mode power supply for better power efficiency. Built-in controllable brushless 25 x 25mm fan delivering 2. 2 cfm for better heat dissipation. Providing both network connection and power supply for your Raspberry Pi in one cable.
Brandwaveshare #ad
ManufacturerWaveshare #ad
Part NumberBC-Official POE+ HAT for RPi-C

2. GeeekPi

#ad

GeeekPi Raspberry Pi 4 Isolated PoE HAT Support IEEE 802.3af or 802.3at PoE Standard,with Raspberry Pi Cooling Fan 30x30x7mm for Raspberry Pi 4 Model B / 3B+ 3B Plus

#ad
GeeekPi #ad - Cooling: 30mm x 30mm brushless fan; Fully isolated switched-mode power supply. Input voltage: 37~57v dc, class 2 device;Output voltage: 5V DC/2. 5a;. Standard:ieee 802. 3af-2003 PoE.
BrandGeeekPi #ad
ManufacturerGeeekPi #ad
Part NumberEP-0127

3. LoveRPi

#ad

Raspberry Pi PoE+ HAT with Low Profile Heatsink

#ad
LoveRPi #ad - 2021 poe+ hat for pi 4: designed for the powerful raspberry pi 4, the raspberry Pi PoE+ HAT delivers up to 20W of power from IEEE 802. 3at poe+ compliant switches so that your Pi 4 never runs out of juice. The original poe hat could not supply enough current for demanding USB 3.

0 devices like backup drives, 4K webcams, and more. Remove the blue plastic and adhere the low profile heatsink to the main chip to reduce temperatures and increase speed. Ideal for reducing cable runs, acting as access point AP, remote sensing and acquisition, the PoE+ HAT further expands already incredible capabilities and processing power. With cooler ambient temperatures or low load, the fan will reduce speed for silent operation. Optimized for remote: power over ethernet provides single cable power and connectivity to the Raspberry Pi 4.

Quiet configurable fan: equipped with a powerful 25mm x 25mm brushless fan, the PoE+ HAT can operate up to 50°C ambient temperature with adequate airflow. Power usb 3. 0 devices: two usb 3. 0 type a ports on the raspberry pi 4 can deliver up to 1A each. Low profile heatsink included: further reduce temperatures by increasing the thermal surface area of the powerful SoC with advanced 3M thermal transfer tape.
BrandLoveRPi #ad
ManufacturerLoveRPi #ad
Warranty30 Days

4. GeeekPi

#ad

GeeekPi Raspberry Pi 4 PoE HAT Support IEEE 802.3af or 802.3at PoE Standard,with Raspberry Pi Cooling Fan 30x30x7mm for Raspberry Pi 4 Model B / 3B+ 3B Plus

#ad
GeeekPi #ad - Built-in 30x30x7mm cooling fan;only support IEEE 802. 3af or 802. 3at poE standard. Compatible with: raspberry pi 4 Model B / Raspberry Pi 3 Model B+. Protection circuitry: transient Overvoltage, Thermal Shutdown, Undervoltage Lockout, Foldback Current Limiting.
BrandGeeekPi #ad
ManufacturerGeeekPi #ad
Part NumberEP-0115

5. UCTRONICS

#ad

IEEE 802.3af Compliant for Raspberry Pi 4, and More, Google WiFi, UCTRONICS PoE Splitter USB-C 5V, Active PoE to USB-C Adapter, Security Cameras

#ad
UCTRONICS #ad - 4. What else needed - you need an ieee 802. 3af compliant poe switch or injector to serve as the PSE Power Source Equipment and an Ethernet cable with PoE signal to feed the splitter. Just put the split Ethernet aside if you don’t need the data.

What is poe – deliver power and data with a single ethernet cable for fewer wall plugs and messed cables. Why poe to usb-c – a cost-effective way to add plug-and-play poe support to 5V USB-C powered devices and make full use of PoE switches, or for a Raspberry Pi 4 setup where a PoE HAT is not applicable. 2. What is it - a uctronics poe splitter to split the poe signal into 5V USB-C power supply and gigabit Ethernet in RJ45 so that non-PoE devices can be powered over Ethernet.

Extend powerline to where no AC outlets are nearby, up to 300 feet away from the power source. This splitter does not support pd or qc fast charging protocols. This splitter provides a maximum output of 2. 4a with its 802. 3af compliance. Note – 1. 3.
BrandUCTRONICS #ad
ManufacturerUCTRONICS #ad
Part NumberGuangDa

6. Argon Forty

#ad

Camera, Cooling Fan, Argon NEO Raspberry Pi 4 Case | Designed for GPIO and PoE Access, and LCD Display | Supports up to Raspberry Pi 4 Model B with 8GB RAM

#ad
Argon Forty #ad - With the raspberry pi 4 case acting as the board's heatsink, it easily keeps your Pi cool for a variety of activities, even when running at maximum performance.

Small formed cooling argon pi 4 case that especially keeps the Raspberry Pi 4 safe from harm while still being easy to hold and carry anywhere and everywhere. The raspberry pi 4 case is designed to easily fit any official Raspberry Pi HAT and Argon Pi HATs; easily allowing you to use your case however you please. The argon neo case supports all available raspberry Pi 4 Model B boards including the Raspberry Pi 4 Boards with 8GB RAM, especially with its easy assembly. All the gpio module, camera, cooling fan, and lcD Display Ports are accessed through the case's magnetic sliding lid; making it perfect for Raspberry Pi Makers.
BrandArgon Forty #ad
ManufacturerArgon Forty #ad
Part NumberAR_NEO_Case
ModelAR_NEO_Case

7. Unistorm

#ad

Raspberry Pi 4 Case RPI 4 Aluminum Case RPI 4B Metal Shell Silver Enclosure for RPI 4 Model B Silver

#ad
Unistorm #ad - We provide returning service. It can reach perfect heat dissipation. If you have any problem, We will accept returning immediately. This aluminum case has exhaust hole surface. Material: aluminum Case Color: Silver. Support raspberry Pi 4 Model B. All ports and slots of the case can match with Raspberry Pi 4 perfectly. Just feel free to buy.
BrandUnistorm #ad
ManufacturerUnistorm #ad
Part Number123456

8. PoE Texas

#ad

PoE Texas Power Over Ethernet PoE HAT for Raspberry Pi 3 B+ 4 and 802.3af PoE Network

#ad
PoE Texas #ad - Provides a regulated 5 volts 2. 4 amp with solder pads on top for a DC bus. Smaller, more space efficient than Official Pi-HAT - Fits inside Official Raspberry Pi Enclosure Not included. Ieee 802. 3af poe solution - works with any PoE or PoE+ Switch Upto 12 Watts. Fits raspberry pi 3 b+ and Raspberry Pi 4 Not Included. For expert technical support from Austin, Texas please call 512 479 0317.
BrandPoE Texas #ad
ManufacturerPoE Texas #ad
Part NumberGAF-PiHAT
ModelGAF-PiHAT

9. Miuzei

#ad

Miuzei Case for Raspberry Pi 4, Raspberry Pi 4b Case with Fan 35mm, with 5V 3A Power Supply, 4 pcs Heatsinks for Raspberry Pi 4 Model B 8gb / 4gb / 2gb -- Support PoE Hat

#ad
Miuzei #ad - This increases the cooling area and creates more airflow for quick cooling. Split design/easy assembly: 3-layer structure design, the upper cover and bottom can be disassembled separately to assemble other accessories, which is very convenient for users who often use GPIO&Camrea.

Universal usb-c interface, Total Lenght:1. 5m / 5ft. Dual cooling systemequipped with a 35 mm quiet fan 5500 rpm and 4 × aluminium heat sink. Easy access to gpio and camera:miuzei raspberry Pi 4B type chassis, each interface is fully adapted, and the external camera and GPIO expansion board can be perfectly matched.

Visibility designhighly visible acrylic top lid;you can see the Running Status of Raspberry Pi 4 in Real-time and The Condition Of Parts of Inside The Case, The smoked tint top is a classy touch. Etl certified power supply:5v 3a etl certificate power supply, do not Worry About Low Voltage and Current Instability.
BrandMiuzei #ad
ManufacturerMiuzei #ad
Part NumberYA-CMC24

10. DSLRKIT

#ad

DSLRKIT Gigabit USB Type C Active PoE Splitter 48V to 5V IEEE802.3af Power Over Ethernet for Raspberry Pi 4 4B

#ad
DSLRKIT #ad - The poe splitter must be connected to the POE switch, POE midspan or 48V~52V POE injector for proper operation.
BrandDSLRKIT #ad
ManufacturerDSLRKIT #ad
Part NumberGType-C
ModelGType-C