Top 10 Raspberry Pi 4B Heatsink – Heatsinks

As an Amazon Associate I earn from qualifying purchases.

1. SGTKJSJS

#ad

Raspberry Pi 4b Heatsink, Raspberry Pi Heatsink Aluminum Heatsink with Thermal Conductive Adhesive Tape for Raspberry Pi 4 Model B

#ad
SGTKJSJS #ad - Suitable for the 2019 latest Version Raspberry Pi 4 Model B. Reduce chip hot-spots and increase thermal dissipation surface area for Cooling Cooler Raspberry Pi 4, Raspberry Pi 3 B+. Can be applied with other devices such as beaglebone, MOSFET SCR, Southbridge, IC Chips, VRAM VGA RAM, Northbridge etc. Thermal conductive adhesive tape backing. Set of 6 Aluminum heat sinks.
BrandSGTKJSJS #ad
ManufacturerSGTKJSJS #ad
Height0.23 Inches
Length0.6 Inches
Width0.6 Inches
Part NumberSRP60-HT

2. Geekworm

#ad

Raspberry Pi 4 Computer Model B Armor Aluminum Alloy Passive Cooling Case Compatible with Raspberry Pi 4 Model B Only, Geekworm Raspberry Pi 4 Armor Case

#ad
Geekworm #ad - You can also use the CPU grease not included to get better heat dissipation. Note: if you think the blue Thermal Tape is not good enough for heat dissaption, you can replace it with thin 05mm cooper heatsink match with silicone grease recommend Shin-Etsu Shin-tsu X-23-7921-5 for better heat dissaption.

All ports and slots of the aluminum alloy case can match with Raspberry Pi 4 Model B computer perfectly; Add 2pcs 2x20 Female Headers to extend the GPIO pin and insert GPIO cable. Geekworm raspberry pi 4 armor case, aluminum alloy metal case specially designed for the Raspberry Pi 4 Computer Model B 1GB/2GB/4GB/8GB.

With 3 pieces thermal pads the thickness is only 05mm to touch the shell body to dissipate heat. Reinforced aluminum material, lightweight and durable, long-lasting stainless. Open case design, don't need to worry about affect wifi signal, it is a good raspberry pi 4 heatsink case with good heat dissaption.
BrandGeekworm #ad
ManufacturerGeekworm #ad
Height0.75 Inches
Length3.39 Inches
Weight0.24 Pounds
Width2.17 Inches
Part NumberTB-2019-19

3. GeeekPi

#ad

GeeekPi Raspberry Pi 4 Dual Fan with Raspberry Pi 4 Heatsink, Raspberry Pi Cooling Fan Kit with Thermal Conductive Adhesive Tape for Raspberry Pi 4 Model B and Raspberry Pi 3B+

#ad
GeeekPi #ad - The original fan is too long to be compatible with the Raspberry Pi 4B and 3B+, the fan uses a more advanced fan making process. It can be close to the heating chip for better heat dissipation, The fan has a better quiet effect and a better cooling effect.

As we know the pi 4b will generate a lot of heat when it running, so it will need a good cooling fan to help it on heat disspasion. This ultimate cooling fan kit is a good choice! package includes:1x dual fan, 1x aluminum heatsink for Raspberry Pi 3B+, 2 x Heatsinks for Raspberry Pi 4 Model B, 1x thick thermal tape for raspberry Pi 3B+, 1 x thin thermal tape for raspberry pi 3b+, 1x Copper Heatsink For Raspberry Pi 3B+, 1x User Manual. The fan is specially built for Raspberry Pi 4B/3B+.
BrandGeeekPi #ad
ManufacturerGeeekPi #ad
Part NumberZP-0037-NEW

4. Geekworm

#ad

Geekworm Raspberry Pi 4 7mm Embedded Heatsink with Fan P165-A, Raspberry Pi 4B Armor Aluminum Radiator with 5V Cooling Fan Compatible with Raspberry Pi 4 Model B Computer and Pi 4

#ad
Geekworm #ad - User manual, refer to WiKi page search P165. Supports to cooling down the raspberry pi 4 board when using the pi 4 expansion boarddo not support poe board; it is compatible with Raspberry Pi 4 expansion board, X857ASIN:B085HG7ZLJ, for example: X825ASIN:B07VXF2HJG, X750ASIN:B07VPWFK9H to slove the raspberry pi 4 overheat problem.

Updatewe only keep the m2. 5*5+4mm, m2. 5*13+6mm spacers in the p165-a packing list, due to the Raspberry Pi expansion board usually with 12mm or 20mm height, M2. 5*5+5mm, the three spacers combination is enough in application. Raspberry pi hat positioning hole is m2. 5 internal thread; this design is convenient to fix, use good quality mute 5v cooling fan, don't worry about the noise of fan.

Supports the installation of 25mm fan; cooling fan can be added when the heat dissipation of a single aluminum heat sink is not enough, so that all Pi 4 heat dissipation problems can be solved. This geekworm embedded armor aluminum alloy heatsink p165-a is only designed for raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Version, ultra-thin embedded heatsink with ONLY 7mm thickness.
BrandGeekworm #ad
ManufacturerGeekworm #ad
Height0.28 Inches
Length2.56 Inches
Weight0.04 Pounds
Width2.17 Inches
Part NumberTB-2019-38
ModelP165-A

5. GeeekPi

#ad

GeeekPi Raspberry Pi 4 Fan, Raspberry Pi Low-Profile CPU Cooler with RGB Cooling Fan and Raspberry Pi Heatsink for Raspberry Pi 4 Model B & Raspberry Pi 3B+ & Raspberry Pi 3 Model B Silver

#ad
GeeekPi #ad - 5mm copper tube;super heat dissipation;Rated power 04w @5v, 008a. Dc 5v power in can be powered by the Raspberry Pi. Compatible with raspberry Pi 4B and Raspberry Pi 3 Model B/Model B+. Color led fan with automatic color change.
BrandGeeekPi #ad
ManufacturerGeeekPi #ad
Weight0.33 Pounds
Part NumberEP-0122

6. Awxlumv

#ad

Awxlumv Raspberry Pi 4b Heatsink, Raspberry Pi Heatsink Aluminum Heatsink with Thermal Conductive Adhesive Tape for Raspberry Pi 4 Model B 4 Sets

#ad
Awxlumv #ad - Suitable for the 2019 latest Version Raspberry Pi 4 Model B. Packing: 4 kits;16 Heatsinks. Reduce chip hot-spots and increase thermal dissipation surface area for Cooling Cooler Raspberry Pi 4, Raspberry Pi 3 B+. Can be applied with other devices such as beaglebone, IC Chips, Southbridge, MOSFET SCR, VRAM VGA RAM, Northbridge etc. Thermal conductive adhesive tape backing.
BrandAwxlumv #ad
ManufacturerAwxlumv #ad
Part NumberRaspberry Pi 4b Heatsink

7. GeeekPi

#ad

GeeekPi Raspberry Pi 4 Aluminum Heatsink with PWM Controllable Fan, Raspberry Pi 4 Armor Lite Heatsink with PWM Speed Control Fan for Raspberry Pi 4 Model B

#ad
GeeekPi #ad - Support pwm speed control - different from ordinary fans, this cooling fan supports PWM speed regulation, which is perfectly compatible with Raspberry Pi OS. Compatible with raspberry pi 4 model b - this armor lite Aluminum Heatsink is only designed for Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB Version. Lightweight and easy to install - With screwdriver and 2pcs screws, it's easy to fix the heatsinks with Raspberry Pi Board. Good heat dissipation effect - with 3510 ultra-quiet cooling fan and thermal pads, it can lower the temperature of Raspberry Pi Board quickly.
BrandGeeekPi #ad
ManufacturerGeeekPi #ad
Part NumberZP-0110

8. GeeekPi

#ad

GeeekPi Raspberry Pi 4B Case, Raspberry Pi Armor Case,Raspberry Pi Aluminum case with Passive Cooling/Shell Heat Dissipation Heatsink Thermal Tape for Raspberry Pi 4B/3B+/3B

#ad
GeeekPi #ad - Compatible with raspberry Pi 4B/3B+/3B. It has passive heat dissipation due to without fan. With 3pcs little thermal tape for better heat dissipation of Raspberry Pi Board. Female socket, 2x20 pins, straight pin, double row, Through Hole mounting. Pitch: 2. 54mm/01". Package includes: 1 x armor case, 1 x allen wrench, 3 x thermal tape, 4 x M2.5 hexagon socket head screws, 2x20Pin Female HeaderNote:Raspberry Pi and Fan Not Included.
BrandGeeekPi #ad
ManufacturerGeeekPi #ad
Part NumberZP-0074-NEW

9. Easycargo

#ad

Raspberry Pi 3 B+ Copper 4pcs, Raspberry Pi Copper Heatsink for Cooling Raspberry Pi 4 B, Easycargo Raspberry Pi 4 Heatsink Copper Kit + 3M 8810 Thermal Conductive Adhesive Tape

#ad
Easycargo #ad - Raspberry pi not included. Includes 4pcs copper heatsink, Main Body Material: Copper. Can be applied with other devices for cooling VRAM VGA RAM, Mosfet SCR, Southbridge, small IC Chips, Northbridge etc.3m 8810 thermal conductive adhesive tape backing. Suitable for cooling Raspberry Pi 4 B, 3 B+ boards. Thermal conductivity: 401W/mK.
BrandEasycargo #ad
ManufacturerEasycargo #ad
Weight0.04 Pounds
Part NumberES-H03C-RPI

10. SunFounder

#ad

SunFounder Raspberry Pi 4B Aluminum Case with Dual Fan Aluminium Alloy Heatsink for Raspberry Pi 4 Model/Pi 4B

#ad
SunFounder #ad - The shell body with stripes design to help the motherboard cool down. Interfaces such as gpio, and 40 pins are reserved, POE, CSI, DSI, which does not prevent other uses.

Suppor raspberry pi model: specially designed for Raspberry Pi 4 Mode B Raspberry Pi 4 Model B is NOT Included. Good heat dissipation: built-in four heat-conducting columns with four 3W thermal tapes plus dual cooling fan, quickly and effectively solve the heating problem of Pi 4B motherboard. Easily access to use: access to all consumer ports and gsi, camera and gpio Connectors. Cool design: 100% aluminum alloy material, easy to conduct heat and wear. Accurate slot size: shell slot and port size designed to be accurate and the open design ensures that wifi/Bluetooth signal transmission is not affected.
BrandSunFounder #ad
ManufacturerSunFounder #ad