As an Amazon Associate I earn from qualifying purchases.
OCESTORE #ad - High qualityocestore premium battery is made of high quality material which can use for a long time. Batteryocestore premium upgrade "battery" integrates esp8266 battery slot, makes it easier to develope ESP8266 ESP8266 project.
Smt connector available for sleep mode; Additional LED Programmable. Super importatnt the positive and negative direction of the battery must be placed correctly, otherwise the charging chip will be damaged.
Any question pls fell free to contact us, we will reply you within 24H. And we offer a 12 month warranty. Can be used while charging. And the green indication LED means full while the red Indication LED means charging. Charging system integration. Can run almost 17 hours if it is put into a standard 3000mah battery. Smt connector is available for sleep mode; Additional LED is Programmable.
HiLetgo #ad - Built-in micro-usb, with flash and reset switches, easy to program. Esp8266 cp2102 nodemcu lua esp-12e wifi serial Wireless Module. Arduino compatible, works great with the latest Arduino IDE/Mongoose IoT/Micropython.
AITRIP #ad - Stable and highly reliable. Great contact and stable signal transmission for your ESP8266 ESP-12E NodeMCU Development Board. Great breadboard alternative.
Gpio 1 into 2: the esp32 breakout board can expand one GPIO pin of development board to two. Convenient to reuse all pins in smart home DIY projects. The expansion board is design with double-layer that one pin is wired on both sides.
Songhe #ad - The controllers are easy to program by using the CP2102-USB interface without having to press the flash and reset buttons before each flash operation.
AITRIP #ad - Esp8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
Esp8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime.
Esp8266 ch340 chip, power your development in the fastest way combinating with NodeMcu Firmware; It's a IOT unit with all available resources on board, support smart link and smart networking. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area.
DORHEA #ad - Esp8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.
Modern internet development tools can use the built-in API to instantly put your idea on the fast track. Esp8266 nodemcu board has powerful on-board processing and storage capabilities, allows to be integrated with sensors and other specific applicated devices through its GPIOs.
This esp8266nodemcu development board can be use for small temperature and humidity monitorin home automation project and works very well with the arduino development platform. The cp2102 esp-12e controllers are easy to program by using the cp2102-usB interface without having to press the flash and reset buttons before each flash operation. Full i/o port and Wireless 802. 11supported, direct download without resetting. It's very easy for arduino projects or any development board with I / O pins.
AOICRIE #ad - Product features: this internet development board is nicely suitable for Arduino, and can be programmed for the for Arduino IDE and support OTA online. Product parameter: this board contains 11 digital input and output pins, all pins have interrupt, PWN, I2C, 1-wire except D0 and a micro USB connection; 1 input under 3.
2v, which compatible for Arduino; 500mA resettable fuse. Wifi development board: on-board 5V 1A switching power supply, 4M bytes.
Weewooday #ad - Wifi development board: on-board 5V 1A switching power supply, 4M bytes. Product parameter: this board contains 11 digital input and output pins, I2C, PWN, all pins have interrupt, 1-wire except D0 and a micro USB connection; 1 input under 3.
2v, which compatible with Arduino; 500mA resettable fuse. Package includes: you will get 10 pieces of development boards, which can be applied for satellite, each module contains 6 pin headers, sufficient quantity can meet your various demands.
Aokin #ad - 2. 4 ghz dual-mode wifi and Bluetooth development with 4 MB of flash. The 2. 4 ghz wifi and bluetooth dual-mode chip adopts low-power 40nm technology, which has the best power consumption and RF performance, safe and reliable, and easy to expand to various applications.
1. OCESTORE
#adOCESTORE Mini D1 Module Wemos D1 ESP8266 with Battery Slot ESP WROOM 02 Motherboard Compatible with Node-MCU
#adSmt connector available for sleep mode; Additional LED Programmable. Super importatnt the positive and negative direction of the battery must be placed correctly, otherwise the charging chip will be damaged.
More information #ad
Overercharge protection; over discharge protection. Optimal reliabilityocestore premium battery is compatible with node-mcu. Package & servicepackage include: 1 pcs x battery development board. Any question pls fell free to contact us, we will reply you within 24H. And we offer a 12 month warranty. Can be used while charging. And the green indication LED means full while the red Indication LED means charging. Charging system integration. Can run almost 17 hours if it is put into a standard 3000mah battery. Smt connector is available for sleep mode; Additional LED is Programmable.
| Brand | OCESTORE #ad |
| Manufacturer | OCESTORE #ad |
| Warranty | 12 months warranty |
More information #ad
2. HiLetgo
#adHiLetgo 1PC ESP8266 NodeMCU CP2102 ESP-12E Development Board Open Source Serial Module Works Great for Arduino IDE/Micropython Small
#adMore information #ad
| Brand | HiLetgo #ad |
| Manufacturer | HiLetgo #ad |
| Height | 1.57 Inches |
| Length | 1.57 Inches |
| Weight | 0.02 Pounds |
| Width | 1.57 Inches |
| Part Number | 3-01-0268-1 |
| Model | 3-01-0268-1 |
More information #ad
3. AITRIP
#adAITRIP 3PCS ESP8266 Breakout Board GPIO 1 into 2 for ESP8266 NodeMCU V3 CP2102 ESP-12E WiFi WLAN Wireless Development Board Module
#adGpio 1 into 2: the esp32 breakout board can expand one GPIO pin of development board to two. Convenient to reuse all pins in smart home DIY projects. The expansion board is design with double-layer that one pin is wired on both sides.
More information #ad
The terminal block board can be connected through by Pin Header & Screw Terminal. You can choose the suitable connecting way for your project. Perfect compatibility: the terminal breakout board is only fit esp8266 ESP-12E NodeMCU Development Board ; ref asin: B08N5WTQ4Q ;B08N6D7PKN. Package included: 3 pack ESP8266 Terminal adapter Breakout Board.| Brand | AITRIP #ad |
| Manufacturer | AITRIP #ad |
| Warranty | 1 |
More information #ad
4. Songhe
#adSonghe ESP8266 NodeMCU CP2102 ESP-12E 4M Bytes Internet of Things WiFi Development Board Serial Wireless Module for Arduino IDE Micropython 3PCS
#adMore information #ad
The development board integrates GPIO, IIC, PWM, 1-Wire and ADC in one. Supporting three modes: ap, stA, and AP+STA;upporting Lua program, easily to develop.| Brand | Songhe #ad |
| Manufacturer | Songhe #ad |
| Height | 0.51 Inches |
| Length | 1.9 Inches |
| Weight | 0.02 Pounds |
| Width | 1 Inches |
| Part Number | J16 |
| Model | esp8266 nodemcu lua |
More information #ad
5. AITRIP
#ad6pcs ESP8266 NodeMCU LUA CH340 ESP-12E WiFi Internet Development Board 4M Flash Serial Wireless Module for Arduino IDE/Micropython New Version
#adEsp8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime.
More information #ad
This esp8266 nodemcu development board can be use for small temperature and humidity monitor in home automation project and works very well Compatible with Arduino development platform. Esp8266 ch340 chip, power your development in the fastest way combinating with NodeMcu Firmware; It's a IOT unit with all available resources on board, support smart link and smart networking. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area.
| Brand | AITRIP #ad |
| Manufacturer | AiTrip #ad |
| Part Number | 15316 |
More information #ad
6. DORHEA
#ad10Pcs ESP8266 CP2102 ESP-12E NodeMcu LUA Internet WiFi Development Board Open Source Serial Internet Wireless Module for IDE Micropython
#adModern internet development tools can use the built-in API to instantly put your idea on the fast track. Esp8266 nodemcu board has powerful on-board processing and storage capabilities, allows to be integrated with sensors and other specific applicated devices through its GPIOs.
More information #ad
Make your development the fastest way combined with firmware for NodeMcu. Support smart link smart networking. The fast and affordable technology for WiFi. It is an integrated unit with all available resources on board. This esp8266nodemcu development board can be use for small temperature and humidity monitorin home automation project and works very well with the arduino development platform. The cp2102 esp-12e controllers are easy to program by using the cp2102-usB interface without having to press the flash and reset buttons before each flash operation. Full i/o port and Wireless 802. 11supported, direct download without resetting. It's very easy for arduino projects or any development board with I / O pins.
| Brand | DORHEA #ad |
| Manufacturer | DORHEA #ad |
| Part Number | 14638-1 |
More information #ad
7. AOICRIE
#ad6 PCS Nodemcu WiFi Development Board with ESP8266 Chip ESP-12F 4MB Byte Module for Arduino
#ad2v, which compatible for Arduino; 500mA resettable fuse. Wifi development board: on-board 5V 1A switching power supply, 4M bytes.
More information #ad
Development board nodemcu mini wireless d1 module for esP8266 ESP-12F 4M Bytes WLAN WiFi Internet Development Board Compatible for Arduino. Mini size: it is a mini compatible with nodemcu lua wifi board based on ESP-8266EX; Mini and compact design, can fit on a solderless breadboard; It is more compact and saves space for your project.| Brand | AOICRIE #ad |
| Manufacturer | AOICRIE #ad |
| Warranty | Irrelevant attribute |
More information #ad
8. Weewooday
#ad10 Pieces Development Board NodeMcu Mini Wireless D1 Module for ESP8266 ESP-12F 4M Bytes WLAN WiFi Internet Development Board Compatible with Arduino
#ad2v, which compatible with Arduino; 500mA resettable fuse. Package includes: you will get 10 pieces of development boards, which can be applied for satellite, each module contains 6 pin headers, sufficient quantity can meet your various demands.
More information #ad
Product features: this internet development board is nicely suitable for Arduino, and can be programmed for the Arduino IDE and support OTA online. Module: with a small and convenient size, this development board based on ESP-12F ESP8266, can help your project save space.| Brand | Weewooday #ad |
| Manufacturer | Weewooday #ad |
| Part Number | Weewooday-12039 |
More information #ad
9. Aokin
#ad1 Pcs, Aokin ESP32 ESP-32S NodeMCU-32S ESP-WROOM-32 Development Board 2.4 GHz WiFi and Bluetooth Dual Cores Microcontroller ESP-WROOM-32 Chip for Arduino NodeMCU
#adMore information #ad
Support lwIP protocol, Freertos. Support three modes: ap, STA, AP+STA coexistence mode. Compatible with arduino, can be programmed with for the Arduino IDE and Lua, Nodemcu, can fit on a solderless breadboard, and micropython, makes your development easier. Powerful, small volume.| Brand | Aokin #ad |
| Manufacturer | Aokin #ad |
| Part Number | 83-1 |
| Warranty | 3 months warranty |
More information #ad
